NOTTINGHAM · NOTTINGHAMSHIRE · DERBYSHIRE BORDER
At Nottingham Fencing we can make and install bespoke driveway gates, perfect for your property.
Metal, wrought iron, composite and wooden driveway gates, hinged or sliding, made to the width of your entrance and hung on posts strong enough to carry them. Send your measurements and a photo for a quick provisional quote, or book a free measured survey.
* Terms and conditions apply to our 12 month guarantee.

Whilst not every driveway needs a gate, many do, depending on the location and purpose of the drive. We offer a complete driveway gate supply and install service, which includes integrating gates into an existing wall or fence, so the job is completed quickly with minimal disruption.
Your choice of gates will largely depend on your personal preference and budget, and the budget can be heavily influenced by whether you already have a suitable fence or wall for the gate posts to be attached to. Most driveway gates are heavy, so they need strong posts that are fixed in well enough to hold the weight firmly.
The alternative to strong post fixings is a sliding driveway gate, as most of its weight sits on wheels at the bottom of the gate that run along a rail. Sliding gates are also a good option where space is tight and there is no room for a gate to swing inwards or outwards. There simply needs to be space beside the opening for the gate to slide behind an existing fence or wall.
As well as supplying and fitting gates, we install driveway gates you have bought yourself, as there are now many options online and you may have your heart set on a particular design. We would strongly recommend arranging a measure up with us before ordering, as many people don't take into account how the posts come into play, how driveway gates are fitted to them and what space allowances need to be made.
We can also provide automated driveway gates, both swing and sliding, by working with a specialist automation company. Simply mention it when our surveyor comes round so we can price your gates with and without automation.
We have installed many metal driveway gates over the years, and whilst many people think wrought iron is the metal normally used for gates, this is not the case. Wrought iron driveway gates are available, but they are typically much more expensive than a steel equivalent. Steel can be worked in the same way, and once made and fitted looks no different, at a much lower price. There are many design options, so your gates can be as simple or intricate as you like, even with your house number worked in. See more on our metal driveway gates page.

Single arched gate

Between brick pillars

4 foot, flat top

With a matching side gate

Ring detail, fleur de lys tops

3 foot, set into new fencing
More and more people are choosing composite driveway gates for the low maintenance and long life composite has brought to fencing and decking. The boards are held in a powder coated steel frame, usually black, which suits almost any board colour and lets us add a decorative top. They can be arched or rectangular, hinged or sliding. See more on our composite driveway gates page.

Grey boards, ring top

Black metal surround

Arched, set into a brick wall
Wooden driveway gates are still the most common choice, and often continue the theme of wooden fencing at the front of the house. Because entrance widths vary so much, we make them to suit your drive, solid or slatted, flat or shaped tops. See more on our wooden driveway gates page, or our garden gates for side entrances.

Curved top pair

Slatted top section

Ledged and braced pair
All Rights Reserved | Nottingham Fencing & Gates Ltd Trading as Nottingham Fencing © 2026
Company Reg. 16650516
Waste Carriers Licence No. CBDL636235
Registered Office address: 162 Beechdale Road, Nottingham, NG8 3FH, United Kingdom